1. Home
  2. Reolink Client & APP


  • Is there no firmware upgrade planned for the RLC-410 and other cameras with IPC_3816? I have over 100 of these installed amongst my home and my clients' offices/homes. If this is the case, they will not be replaced by Reolink cameras. That's not a threat to try to get my way - I'm just saying. That
    | andy_329177652060407
    0
    8


  • Hi, any chance to view the camera on iOS browser without adobe flash? Flash cannot be installed on iOS. Using a 410 and 423 camera with latest firmware. Regards Marcus
    | Saegis_19391599512
    0
    31


  • Seeking further info from Reolink community on why the app stopped connecting over the last month. The security cameras apps and router have been reset many times over the last month. I also followed all the Reolink troubleshooting The Reolink app (Android) has also been uninstalled (files wiped)
    | stopjunkmail35_272860933775504
    0
    2


  • I have 4 ReoLink cameras E1 Zoom, 2x E1 Pro and an RLC 410W My impression is that the software is really quite buggy All four cameras have SD cards, all are set to activate recordings based on motion limited by a schedule. The firmware is up to date I have client software installed on 2 Android
    | tomselbyuk_331910860959874
    0
    3


  • Hi all, I am quite new to this so apologies for the inept question! I was checking some footage the other night via a Windows PC and I could not see the 1x, 2x, 4x playback speed options. My assumption is the client version I have is probably too old (V7.2.2.33), however I can see this section of
    | ylouis29_209151942221972
    0
    12


  • My biggest complaint is the date and time formatting. I use Month/Day/Year, and 12 hour. Setting this is fine for previewing and live view, but playback is wrong. Timeline is 24 hr and day/month/year. I'm getting old and this gets confusing when searching for specific times during playback. This nee
    | fishki
    1
    1


  • I am looking for tips to minimize lag on the client or app. I am using a new 8 channel NVR. When I set the system up several weeks ago, it seemed to be quite fast, maybe one or two seconds lag. Now it could go 7 or 8 seconds. What would most consider normal lag? Thanks, James
    | james1549_342697892462735
    0
    2


  • I have 5 POE cameras and 2 wifi cameras. Sometimes when I open the mobile app on either a iPhone or iPad, the wifi camera’s show up multiple times. It’s very random, at times just the two show up, others maybe one of the two are duplicated or sometimes both are. Their location in the 9 pane view is
    | beck peter_329808948686976
    0
    4


  • I have the RLN16-410 (H3MB02) and as of version 8.x of the client my screen glitches. I am using the latest client, 8.1.5, although this issue has happened on all of the beta versions. The problem is that the screen will flicker at times and sometimes red squares show up, and sometimes the entire wi
    | john_31467943973028
    0
    7


  • Hi Does anyone know if there are any release notes (what has changed) for the Windows Client like there is for the firmware updates? I've just updated to v8.1.28, it looks like the Play/Pause button has disappeared in playback, not sure if that is deliberate? I was just wondering what else has chan
    | Gary D._344027431432324
    0
    6


  • new Reolink client video doesn't run as smooth in live view as older version, picture in picture feature was removed in RLN4-410 build 20102144, this feature was very convenient for my 2 camera setup, I would like to see it back or a split screen option for 2 cameras
    | structdjm_361258204491941
    0
    2


  • Good afternoon (o; Been using some Reolink cameras for few weeks now together with different client apps and here some feedback/thoughts which also go into the app store reviews... macOS client App: - Why the heck has the software developer not implemented the feature that after restart the ap
    | Richard_347934761918632
    1
    12


  • hi there, When I have the reolink client 8.1.28 open it uses about 200MB RAM. When I minimize to the task bar, it uses about 4GB RAM. I maximize it again and it goes down to the about 150-200MB RAM again. When I minimize it, it goes up to 4GB RAM again. I feel like this is not intended behavior.
    | duskdevilza_357623965520017
    0
    5


  • Feature Request - Alarm beep on motion - Add parameters for intervals This Alarm beep feature is super handy to know when someone walk up a driveway. The Reolink Client beeps when motion is detected. However it continues to beep over and over and over while there is motion in that space. If ther
    | trevor_358870178750670
    0
    2


  • MERRY CHRISTMAS 80465511_2498672090406313_8562036477310009344_n.jpg
    | privatejordy_202187548848322
    0
    1


  • One of the features of the new Windows Client that I LOVED was that it would check for new software when opened. This saved me from having to check the Reolink support web site (day after day after day) looking for new software. Today, one of my "Is your software current? programs announced that Reo
    | Crimp On_62210811129
    0
    2


  • I have a RLC-520 and Reolink client 8.1.20. When the camera is detecting motion, its configured to record video in the microsd. How can I see which videos where recorded during a specific date in the past? This guide: https://support.reolink.com/hc/en-us/articles/360003452213-Playback-Download-Rec
    | brandinoa_341775868170492
    0
    4


  • Hello, I wrote to suppor reolink, to find out if there was a firmware for the reolink rlc423 camera with HTML5 support. Support replied yes, providing me with firmware as an attachment. IPC_51516M5M.116_20103100.RLC-410-5MP.OV05A10.5MP.REOLINK.pak I upload this firmware on the camera. The update w
    | Vianney Hénon_190088257482994
    0
    3


  • I recently upgraded from the old "Reolink Client" v3.3.14.45 to the new "Reolink" app v8.1.20 on both my Mac and on my PC. While most of the new features are great, such as 4x playback, and the performance improvement is good, I can't figure out how to get more than 1 camera to play back simultaneou
    | Steven Kan_61128021664
    0
    5


  • Hi is there any plans to enable the cloud function for the UK customers on the reolink Go battery camera ? it seems silly not being able to do this, a thief can just steal the camera and remove the battery before I get a chance to download the footage.... I just don't understand why other countrie
    | exchange2_282399799083237
    0
    16

Welcome Back!

Hi there! Join the Commnunity to get all the latest news, tips and more!

Join Now