Posts made by big_ted

@joseph_1979 Mine updated through the client this morning. I have requested information on the update from support.
They may have pushed through a beta test which support have done before.

The PC client has been updated to V8.16.8. I havent seen a list of changes but will post here if I find them.
Once again ive passed feedback on that a changelog be included in any update notification so can decide if a worthy risk updating.

@joseph_1979
I believe the standard RLC-511W is limited to 128gb, and the WA is 256gb.
https://reolink.com/files/docs/specs/RLC-511W-IP-Camera-Specifications.pdf

@makofi-security_686092416798871
Potentially an SD card issue, format the card, next step reset the camera. If still no luck email support, they are usually great to deal with.

@emailscottmoore_537972705190035
Have you tried turning off hardware decoding?
If the client doesnt stay open enough to turn it off, there is a method posted on the forums here

@reolink-daisy Congrats to all the winners!

@reolink-daisy
Im sure there will be lots of excited people with this news. Excellent step in the right direction.

Have been running this version on Samsung phones with no issues. Dont have a NVR so havent tried those features out, but so far app is stable.

@reolink-daisy
Congratulations to all winners

This can be due to a few different reasons. One is some cameras have a newer version just to identify a newer run of the camera and although the version numbers are different, its effectively the same version. Secondly some newer firmwares are not published to the website or do take some time to be published. If in doubt, email support as they can email the newest version out, but I would say you just
have a version that hasnt been published online yet. Ive had this happen with a few cameras now to date.

Just thought id throw a reminder out to everyone that most of cameras dont auto update the firmware via the app or client. The exception is battery cams.
There has been a few recent firmware updates added to the download section, so highly recommend to check it out if you havent.
Also if in doubt, email support and at the very least they will send out the latest file available for your cam.
https://reolink.com/download-center/

@reolink-daisy
WIFI 6 is a great improvement and becoming fairly standard for most routers/modems these days. I do also find a slight improvement with range and reliability of connection at the edge of the WIFI range which is fantastic.

@user_828926462390425_828926462390425
email this request to support also. I have been requesting this for sometime as its important to know wether certain fixes have been made before updating and would reduce
complaints of people updating and not having an issue fixed or a new issue created.

@joseph_1979 no works great. My old man games online with no issues with games like battlefield etc
Starlink is unlike any other satellite internet and is in a much lower orbit and believe it used satellite meshing between satellites and ground units adn thats how they reduced the ping and increased the speed.

@joseph_1979 no its great. Nothing like any previous satellite internet.

@joseph_1979 yes good ole Aussie fixed wireless. Max speed was reduced to max 10mbps uploads until a rollout of new towers was done to reduce conjestion.

@ml_812798949916887
normally the starlink is around 200-400mpbs down average around 40mbps up where it is getting used, but that can vary depending on where you are etc.
99% of the time no issue with Reolink cams. have around 10 running on the property with no issue

@joseph_1979 Yes, software is where Reolink need the most work.

@user_629252950196266_629252950196266
We have been using multiple cameras on starlink in Australia and 99% of the time have no issue. My understanding is starlink has slower uploads than most providers.
occassionally we get a streaming issue on which I put down to conjestion at that time. Rest of the time starlink works perfect with Reolink.
We are using Unifi routers and AP's from the starlink router.

@user_703946676973804_703946676973804
what part is not working? is the app installed or is not image displaying from the cameras?