Posts made by joseph_1979

@domkal_775112654221518 You can check the firmware at Reolink Download Center. To upgrade the cameras and NVR follow this link https://support.reolink.com/hc/en-us/articles/900004550323-How-to-Upgrade-Firmware-via-Reolink-Client-New-Client-/#:~:text=Launch%20Reolink%20Client%20and%20log,)%2C%20and%20then%20click%20Upgrade.

Moreover, I will disable detection on 'any motion' and base my detections on AI (person, vehicle and animal).

@user_776132184023237_776132184023237 Battery operated cameras use a different communication protocol and they can only be controlled through their clients. Do you know of any other brand which allows you to do so?

@gerald-laganiere_70786400346274 What is the processor of your PC and how many cameras are being shown at the same time? And do you have other background programs? You can check this through t he taskman.

@karschti_637593818415162 The IR lights are on when the ambient light is less that a threshold and will remain so until the ambient light is higher than the threshold value. Conversely. the spot light comes on when an object is detected and will stay on till the object is visible or max recording time (for non-continuous recording).

In case of E1 Zoom consider an average power consumption of 5W.

Do you have an issue on power consumption? This basically nothing....consider a lamp of 5W.

@user_775445647925502_775445647925502 I don't know. I am a customer like you supporting members based on my engineering knowledge and the experience I got from using their products. Whenever I have an issue I contact support using emails.

@mrfchirpy_328132979335308 check smartphones dc adapters. Should be 5V@2A.

@user_775445647925502_775445647925502 I guess you have the newest firmware both versions. You may check from the reolink download center. I don't have the 820 cam and so cannot help. Did you try to reach out Reolink Support?

@hainz74 After update it could be that https is not enabled. Go to network and check it out.

Follow this https://support.reolink.com/hc/en-us/articles/900004435763-How-to-Set-up-Reolink-Ports-Settings-via-Reolink-Client/

@mrfchirpy_328132979335308 If it is a WIFI issue the led will be red. If it completely stops then it can be either the battery or the dc adapter. The charging current provided by the adapter is not enough to keep it in operation. Can you measure the output voltage from the adapter? Do you have a similar adapter to check?

@user_711725607157890_711725607157890 If you think that their products are not according to their specifications or your expectation you are free to chose from other brands.

@rob_530137440497875 It has no IR lights. Just a low street lighting would ve more than suffice. Go to YouTube and watch some videos from independent persons.

@rob_530137440497875 that is caused by the IR reflections. Either use an external illuminator and switch off the camera IR lights or have the CX410.

@reolinkshayla Thanks for the support and the great products. We sometimes criticize some functionalities or malfunctions but we do it for you to improve and provide better quality products. Nothing is perfect in this world including ourselves :).

Wishing you, your team and your families a healthy, joyful and successful 2024.

@karschti_637593818415162 For the Trackmix WIFI, power consumption is as follows

Day=5.3W, IR on =8.6W and Spotlight ON=9W.

@romu J'ai aussi le TrackMix et je dirais que l'algorithme d'IA doit être affiné car il détecte par erreur un véhicule à l'arrêt et le balancement des branches de plantes comme des animaux. J'ai transmis les vidéos en haute résolution pour les aider à améliorer l'algorithme d'IA. De plus, je confirme la dérive de la position du moniteur et je dois la régler manuellement. Je pense que cela est attribué au mécanisme d'engrenage/moteur pas à pas et je ne pense pas que cela sera résolu à 100 % grâce au firmware. Mon opinion personnelle en tant qu'ingénieur. Mais dans l'ensemble j'en suis satisfait malgré ces deux défauts. Espérons qu'ils résoudront ce problème dans les nouvelles versions.

@pierre Are you using VPN between the sites? Do you have routers at the endpoints? Try to use 192.168.1.0/23 at both sites. Have a look at https://community.reolink.com/topic/6726/unable-to-access-reolink-ip-cams-from-different-vlan

@crimp-on_62210811129 same here. Support always assisted when requested.

@user_766032062857466_766032062857466 Fully in agreement. Or else MQTT/matter.

@user_773755215593672_773755215593672 Unfortunately the issue is still being experienced even with the E1 OD Pro (but occurrence is far less). It is rather difficult to eliminate completely through fw upgrades. They have to re-design the gearing mechanism.

@user_753931108643014_753931108643014 Kindly check from the Reolink download center that you have the latest firmware installed on your camera.